Kalte-Spray (Cold Spray)

DESCRIPTION Cold Spray is used universally for repairs and fault location in all areas. This spray allows structural components to be inserted into the tightest of fits. Using the spray is an easy way to locate faults in electrical circuits which have been caused by thermal overloading and it can also be used for testing temperature probes to make sure they work. It can even be used in medicine for preparing tissue samples for microscopic analysis.-

PROPERTIES

- does not contain solvents
- rapid localised cooling
- risk of freezing if comes into contact with the body
- universal use

TECHNICAL DATA

Colour:colourless
Basis: special cryogen
Propellant:propane/butane
Density at 20 °C0.54 g/cm3
Cooling effect:local freezing down to -45 °C

APPLICATION Cold spray has been developed for fitting ball bearings, shafts and bushes. Our spray can also be used for locating electrical faults in components which have been caused by thermal overloading as well as for testing temperature probes to make sure they work. Cold Spray can also be used for cooling hot components and for preparing tissue samples for microscopic analysis.

APPLICATIONS Spray the components or objects to be treated, evenly for a few seconds. The freezing effect can be varied according to the duration of spraying. The product is harmless if used properly. There is a risk of freezing if it comes into contact with the body.

AVAILABLE
PACK SIZE Cold spray 400 ml aerosol Part no. 8916